Furnace not turning on in Wichita? Before you panic on a cold morning, run through a few quick checks — then call Slater Heating and Cooling at (316) 351-8894 if heat still will not start. We are a family-owned Wichita HVAC company (opened January 2021) with same-day furnace repair when possible and 24/7 emergency coverage for no-heat calls.
Quick checks you can do safely
- Thermostat: Confirm it is set to Heat, the setpoint is a few degrees above room temperature, and the batteries are fresh if it uses them.
- Power: Check the furnace switch (looks like a light switch near the unit), the breaker panel, and any blown fuse on the furnace door.
- Filter: A clogged filter can trip the high-limit switch and stop heat. Replace a dirty filter, then reset power for a minute and try again.
- Vents and doors: Make sure return vents are open and the furnace cabinet door is seated so safety interlocks can close.
- Gas and CO safety: If you smell gas, hear hissing, or suspect carbon monoxide, leave the home immediately and call for emergency help — do not keep troubleshooting.
If those steps fail, stop. Continuing to reset a locked-out furnace can mask a safety issue. That is when a professional diagnosis matters.
Why Wichita furnaces fail at startup
Kansas fall and winter swings are hard on ignition parts, flame sensors, and blower motors. Dust from dry plains weather clogs filters fast. Common no-heat causes we see around Wichita, Derby, Andover, Maize, Goddard, and Haysville include:
- Dirty flame sensor or failed hot-surface igniter
- Tripped limit switch from restricted airflow
- Faulty control board, pressure switch, or inducer motor
- Thermostat wiring or failed thermostat
- Gas supply / valve issues (professional only)
When it is an emergency
Treat it as urgent if overnight lows are near freezing, you have infants/seniors at home, pipes are at risk, or the system will not stay lit. Call (316) 351-8894 for 24/7 emergency HVAC service. We prioritize no-heat calls.
Repair now or plan replacement?
Age, repair frequency, and safety findings drive the call. If your furnace is older or repairs keep stacking up, review our repair vs replace checklist and Wichita furnace replacement cost guide. We give straight options — no scare tactics.
Prevent the next no-heat morning
Book a fall furnace tune-up for $89/season before the first hard freeze. See HVAC maintenance & tune-ups and our homeowner guide on preparing your furnace for a Kansas winter. Regular service catches weak igniters and dirty sensors while they are still cheap fixes.
Call Slater for furnace repair in Wichita
Need heat restored? Call (316) 351-8894 for furnace repair in Wichita, KS. Up-front pricing, owner-operated service, and clear explanations before we start work.
Frequently Asked Questions
Why won’t my furnace turn on but the fan runs?
Often a flame-sensing or ignition problem: the blower can run on a call for heat even when burners never light. That needs a tech diagnosis.
My furnace blinks a light code — what should I do?
Note the blink pattern, check the filter and thermostat, then call us. Error codes point us to the right part faster.
Is a furnace not turning on dangerous?
It can be. Gas smells, yellow flames, or soot mean stop and get help. Even “just won’t start” issues can involve safety switches that should not be bypassed.
How much is a service call in Wichita?
We explain pricing up front before repair work begins. Seasonal furnace tune-ups are $89/season if you want a proactive check instead of an emergency visit.
Do you serve suburbs outside Wichita?
Yes — Derby, Andover, Maize, Goddard, Haysville, Mulvane, Clearwater, Valley Center, Rose Hill, Benton, Park City, Bel Aire, Augusta, and nearby towns.
Should I keep resetting the furnace?
One reset after a filter change is reasonable. Repeated resets without a fix can stress parts and hide a safety lockout — call for service.
Why won’t my furnace turn on but the fan runs?
Often a flame-sensing or ignition problem: the blower can run on a call for heat even when burners never light. That needs a tech diagnosis.
My furnace blinks a light code — what should I do?
Note the blink pattern, check the filter and thermostat, then call us. Error codes point us to the right part faster.
Is a furnace not turning on dangerous?
It can be. Gas smells, yellow flames, or soot mean stop and get help. Even issues that look like a simple no-start can involve safety switches that should not be bypassed.
How much is a service call in Wichita?
We explain pricing up front before repair work begins. Seasonal furnace tune-ups are $89/season if you want a proactive check instead of an emergency visit.
Do you serve suburbs outside Wichita?
Yes — Derby, Andover, Maize, Goddard, Haysville, Mulvane, Clearwater, Valley Center, Rose Hill, Benton, Park City, Bel Aire, Augusta, and nearby towns.
Should I keep resetting the furnace?
One reset after a filter change is reasonable. Repeated resets without a fix can stress parts and hide a safety lockout — call for service.
In Andover? See furnace repair in Andover, KS.
Related: Furnace repair · Emergency HVAC · $89 tune-ups · Winter furnace prep · Replacement cost.
Slater Heating and Cooling LLC is a family-owned HVAC company serving Wichita, KS and nearby towns. Opened January 2021. Call (316) 351-8894. Seasonal maintenance $89/season. Office hours Monday–Friday 9am–5pm; 24/7 emergency HVAC service available when your heat or AC fails. Service area includes Derby, Andover, Maize, Goddard, Haysville, Mulvane, Clearwater, Valley Center, Rose Hill, Benton, Park City, Bel Aire, and Augusta.